Description
Send Inquiry
| Designed to last at least 100, 000 hours at L70 | Can be with European standard plugs |
| Daylight sensor are available | The most powerful LED light replacing 1,000W MH/HPS lamps. |
| Optional ZHAGA socket | IP65 IK10 protection |
| Protection degree IP66 | Emergency power can be brought in |
| Possible energy savings of more than 70% | IESNA TM-15-11 |
| Compatible with ZIGBEE/LORA Outdoor Wireless Control System | Fully die cast aluminum housing |
| Combined with high end quality Meanwell driver | Water-proof: IP66, IK10, wind resistance: >17 grade |
| Input Voltage Range from 90-305V | Dustproof |
| Easy to keep horizontal with Level bubbles | EMC LVD certified |
| PMMA/PC lens are all available | EMC list |
| LM-79-08 test report for each model | Easy maintenance |
| 0-10V/1-10V/DALI/PWM/Timmer dimmable | IESNA TM-15-11 |
| Deep gray or light gray finished | ANSI/NEMA/ANSLG C78.377-2011 |
| NTC is mounted on PCB board to protect over temperature | Inventronics/Meanwell LED drivers are both available |
| IES LM-82-12 Test report is available | Power factor greater than 0.95 |
| Come with Short cap if NEMA mounted without controller | for billboard lighting |
| Minimum CRI of 70, 80 and 90 optional | EMC list |
| Customized pole adapters available for special installation | Available in 6500K |
| High quality cool, neutral & warm white light with high color consistency | Housing made by aluminum EN AC-43100 |
| Photometric engine and electronic assembly is easy to replace on-site | Integral 10KV surge suppressor for diode and entire system protection |
| Multiple lighting control options are available, e.g. DALI, 1-10V, photocell, motion sensor. | 150 lumens / watt guarantees energy savings and a bright lit up space. |
| Street and roadway lighting | IP66,IK10 test reports |
| Smart and versatile design of 4-in-1 installation | Suitable for both Indoor and outdoor uses |
| Customized installation bracket upon request | Can be with long cable |
| External NTC sense element to protect the system | The bracket can be stainless steel |
| Semi-cut-off or Full-cut-off luminaire | Soft light protect your eyes |
| SELV output for most models | Unique functional design |
| IK08 Rated as per EN60598, EN62262 and EN60068 | No UV or IR in the beam |
| Convenient electrical compartment access from below the luminaire | Used for Large stadium, all kinds of large stadium, ships, squares, airports, commercial sites, outdoor advertising and so on |
| Optional recess trims to suit variety of canopy roofs | three wattages per size |
| Metal texture frame quite nice | used for airport |
| Power range from 30-240w | Wall /Ceiling of Mounting Location |
| Power Efficacy >90% | Available in 6500K |
| Series H led Recessed lights | The label on the light fixture can be customized |
| Die cast Aluminum design, better cooling, light quality, LED Tj < 85℃. | Optional laser pen can be used to correct the direction |
| Shell materials: Aluminum & PC | Green and eco-friendly without mercury |
Hot Tags: Passed 3G Vibration test LED branch road light, manufacturers, suppliers, buy, cheap, price
