1. The LED street lamp power supply must be constant current
The characteristics of the lighting material of the LED street lamp determine that it is affected by the environment. For example, as the temperature changes, the current of the LED will increase; in addition, the increase of the voltage will increase the current of the LED. If long-term operation exceeds the rated current, it will greatly shorten the life of the LED lamp beads. LED constant current is to ensure that the current value of its work remains unchanged when environmental factors such as temperature and voltage change.
2. Constant current accuracy of LED street lamp power supply
The constant current accuracy of some power supplies on the market is poor, and the error may reach ±8%, and the constant current error is too large. The general requirement is within ±3%. According to the 3% design plan. Production power must be fine-tuned to achieve ±3% error.
3. Working voltage of LED street lamp power supply
Generally, the recommended working voltage of LEDs is 3.0-3.5V. After testing, most of them work at 3.2V, so the 3.2V calculation formula is more reasonable. The total voltage of N lamp beads in series=3.2*N
4. What is the most suitable working current of the LED street light power supply?
For example, the rated working current of LED is 350 mA. Some factories use it up at the beginning. The design is 350 mA. In fact, it is very hot to work under this current. After many comparison tests, it is ideal to design it to 320 mA. . Minimize the amount of heat generated, so that more electrical energy becomes visible light energy.
5. How wide is the series-parallel connection and wide voltage of the LED street light power board?
To make the LED street lamp power supply work in a wide range of input voltage range AC85-265V, the series and parallel mode of the LED light board is very important. Try not to use a wide voltage, which can be divided into AC220V and AC110V as much as possible, so as to ensure the reliability of the power supply. Since the current power supply is generally a non-isolated step-down constant current power supply, when the required voltage is 110V, the output voltage should not exceed 70V, and the number of series connections should not exceed 23 strings. When the input voltage is 220V, the output voltage can reach 156V. In other words, the number of series does not exceed 45 series. Do not connect too many in parallel, otherwise the working current will be too large and the power supply will generate serious heat. There is also a wide voltage solution. APFC active power compensation is to use L6561/7527 to raise the voltage to 400V first, and then step down, which is equivalent to two switching power supplies. This program is only used under certain conditions.
6. Isolation/non-isolation
Generally, if the isolated power supply is made into 15W and placed in the LED street lamp power tube, the transformer is very large and difficult to put in. The space structure depends on the specific situation. Generally, the isolation can only be 15W, and it is very expensive to exceed 15W. Therefore, the cost-effectiveness of isolation is not high. Generally, non-isolated products dominate the mainstream, and the volume can be made smaller, with a minimum height of 8 mm. In fact, non-isolated security measures are in place and there is no problem. Space permitting can also be used as isolated power supply.
7. How can the LED street light power supply match the lamp bead board?
In fact, choose the most excellent series-parallel connection method, the voltage and current applied to each LED are the same, but the effect of the power supply can exert the best performance. The best way is to communicate with the power supply manufacturer first and tailor it. Or produce your own power supply.
8. LED street lamp power efficiency
Input power minus output power value. This parameter is particularly important. The larger the value, the lower the efficiency, which means that a large part of the input power is converted into heat and emitted; if it is installed in the lamp, it will produce a high temperature. , Coupled with the heat emitted by a luminous efficiency ratio of our LED, will superimpose to produce a higher temperature. The lifespan of all electronic parts inside our power supply will be shortened as the temperature rises. Therefore, efficiency is the most fundamental factor that determines the life of the power supply. The efficiency cannot be too low, otherwise the heat consumed on the power supply is too large. The efficiency of the non-isolated type is higher than that of the isolated type, generally more than 80%. However, the efficiency is related to the matching connection method of the light board
9. LED street light source heat dissipation
The main factor of the heat dissipation scheme is that the LED street lamp beads can greatly extend the life when used under overheating conditions. Generally, aluminum alloy is used for easier heat dissipation. That is, the LED street lamp power beads are attached to the aluminum substrate, and the external heat dissipation area is maximized.
10. LED street lamp power supply heat dissipation
The main factor of heat dissipation is that the LED street lamp power beads can greatly extend their life when used under overheating conditions. Generally, aluminum alloy radiators are used, which is easier to dissipate heat. That is, the LED street lamp power beads are attached to the aluminum substrate, and the external heat dissipation area is maximized.

