The NEMA type light controller is to install the NEMA socket on the lamp. This design is often used for street lamps or area lighting lamps. The light controller uses SUB-1GHz communication protocol (ISM 433MHz) to communicate with the gateway.
Normally there are 3 pin, 5pin and 7 pin Nema socket.
FeaturesThe NEMA interface single lamp controller contains a current and voltage metering circuit, which can collect the load work and power consumption of the single lamp controller in real time. By collecting the power factor of each street lamp, the lighting rate of the street lamp can be counted, which greatly reduces The work pressure of the street light management department improves work efficiency, thereby significantly improving social energy-saving benefits.Measurement and controlThe light controller is connected to the NEMA socket, and then connected in series between the AC input terminal and the LED power supply. The microprocessor of the light controller will be responsible for digital communication, sensor control, remote light on/off, troubleshooting, and working status report.Sensors and scalabilityOptional light sensor.Provide additional I/O ports to facilitate the connection of external sensors.
